Issue:
How do you install the M2C or M6C contacts in a PowerPacT P-Frame or R-Frame circuit breaker?
Product Line:
PowerPact P-Frame and R-Frame Accessories
Resolution:
First, remove the accessory cover from the breaker. Remove the trip unit by sliding the green 12-pin connector out on top, loosening the screws on top and bottom of the trip unit, and sliding it out. Connect the connection piece on the contacts to the specific spot on the breaker, and tighten the two screws on the piece. Reinstall the trip unit back into place. For more information, see the video below:
How do you install the M2C or M6C contacts in a PowerPacT P-Frame or R-Frame circuit breaker?
Product Line:
PowerPact P-Frame and R-Frame Accessories
Resolution:
First, remove the accessory cover from the breaker. Remove the trip unit by sliding the green 12-pin connector out on top, loosening the screws on top and bottom of the trip unit, and sliding it out. Connect the connection piece on the contacts to the specific spot on the breaker, and tighten the two screws on the piece. Reinstall the trip unit back into place. For more information, see the video below:
Released for:Schneider Electric USA
