Issue:
What is the minimum clearance required for I-line and I-line II busway?
Product Line:
Busway
Environment:
I-line and I-line II busway
Cause:
N/A
Resolution:
Schneider Electric does not publish documents that define clearances between walls, runs and obstructions in general. The NEC states the busway joints must be accessible for maintenance. However, the Oxford manufacturing has advised that busway should be separated by a minimum of 3"inches all the way around, top, and bottom.
What is the minimum clearance required for I-line and I-line II busway?
Product Line:
Busway
Environment:
I-line and I-line II busway
Cause:
N/A
Resolution:
Schneider Electric does not publish documents that define clearances between walls, runs and obstructions in general. The NEC states the busway joints must be accessible for maintenance. However, the Oxford manufacturing has advised that busway should be separated by a minimum of 3"inches all the way around, top, and bottom.
Released for:Schneider Electric USA
