How to configure identification information for the SCADAPack x70 device

Question

Accepted Answer

To configure identification information for the SCADAPack x70 device

1.On the Configuration Tab, select SCADAPack > Settings.

2.Expand the Advanced Configuration parameters and configure the settings for:

The following table describes the Identification Strings parameters.

Parameter	Parameter Description
Location Name	Where the SCADAPack x70 device is installed. Maximum length: 255 characters with spaces.
ID Code/Number	A numeric identifier for the SCADAPack x70 device. Maximum length: 32 characters with spaces.
Device Name	A name for the SCADAPack x70 device. Maximum length: 32 characters with spaces.

3.Click Apply.