Can the GV2 be used on single phase applications?
Issue:
Can the GV2 be used on single phase applications?
Product Line:
Tesys Contactors and Overload Relays
Environment:
All Products
Cause:
Application Assistance
Resolution:
Yes, however you must verify that the device in question is suitable for the load to be controlled. Additionally, because these devices have single-phase sensitivity, provisions must be made to ensure nuisance tripping does not occur due to single phasing. This can be accomplished by wiring the current in series whereas all three poles of the device pass the current.
Can the GV2 be used on single phase applications?
Product Line:
Tesys Contactors and Overload Relays
Environment:
All Products
Cause:
Application Assistance
Resolution:
Yes, however you must verify that the device in question is suitable for the load to be controlled. Additionally, because these devices have single-phase sensitivity, provisions must be made to ensure nuisance tripping does not occur due to single phasing. This can be accomplished by wiring the current in series whereas all three poles of the device pass the current.
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.