Issue:
Product Design Features
Product Line:
QO load centers
Resolution:
All QO Load centers are ONLY designed to accept QO plug-on type branch breakers. So a bolt-on type branch breaker CANNOT be installed into the QO load centers.
NOTE: For a back-fed application in a QO load center, a plug-on type branch breaker must be used. Also, the correct retaining kit part number MUST be used for compliance with the National Electrical Code (NEC).
Product Design Features
Product Line:
QO load centers
Resolution:
All QO Load centers are ONLY designed to accept QO plug-on type branch breakers. So a bolt-on type branch breaker CANNOT be installed into the QO load centers.
NOTE: For a back-fed application in a QO load center, a plug-on type branch breaker must be used. Also, the correct retaining kit part number MUST be used for compliance with the National Electrical Code (NEC).
Released for:Schneider Electric USA
