How do you configure the Ethernet IP address on an ATV6000 MV drive?
Resolution:
The Ethernet IP address and related network settings must be configured during the initial commissioning phase of the ATV6000 MV drive.
These parameters are set by Field Services personnel before leaving the site. If changes are needed after commissioning, contact your service representative.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric USA
