Do I need a special DTM file to connect SoMove to ATV650F or floor-standing drives?
Resolution:
No, a special DTM file is not required to connect SoMove to ATV650F or other floor-standing Altivar Process drives.
Key Points
- The standard ATV600 DTM library supports both ATV630 and ATV650, including floor-standing (F suffix) models.
- This means you can use the same DTM package for wall-mounted and floor-standing drives without any additional files.
- Compatibility is built into the Altivar Process ATV6xx DTM Library, simplifying setup and reducing configuration time.
Recommended Action
- Install the latest ATV600 / ATV6xx DTM Library.
- Select the appropriate drive model (ATV630 or ATV650) within SoMove.
- Proceed with the connection using standard settings.
Altivar Process ATV6xx DTM Library DTM files | Schneider Electric (se.com)
Example below:
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Released for: Schneider Electric USA
