sub-base - soldered electromechanical relays ABE7 - 16 channels - relay 5 mmShow more characteristics
Product availabilityStock - Normally stocked in distribution facility
Main range of productModicon ABE7 product or component typeElectromechanical output relay sub-base [Us] rated supply voltage24 V DC PLC end number of channels16 number of terminal per channel1 Complementary terminal block typeRemovable polarity distributionPolarity distribution contact common per group of 8 channels fixing modeBy clips 35 mm symmetrical DIN rail)By screws solid plate with fixing kit) width4.92 in (125 mm) maximum current per output common12 A current per channel2 A preactuator end minimum switching current1 mA >= 5 V drop-out voltage2.4 V 68 °F (20 °C) PLC end) switching frequency<= 10 Hz<= 0.5 Hz threshold tripping voltage19.2 V 104 °F (40 °C) drop-out current0.5 mA 68 °F (20 °C) maximum power dissipation per channel in W0.22 W PLC end) contacts type and composition1 NO preactuator end maximum switching voltage250 V AC 50/60 Hz IEC 60947-5-130 V DC IEC 60947-5-1 number of channel per common8 electrical durability500000 cycles 200 mA 24 V DC-13 10 ms preactuator end)500000 cycles 400 mA 230 V AC-15 preactuator end)500000 cycles 600 mA 230 V AC-12 preactuator end)500000 cycles 600 mA 24 V DC-12 preactuator end) electrical reliability1e-008 operating time<= 10 ms coil energisation and NO closing<= 6 ms coil de-energisation and NO opening contact bounce time<= 5 ms 1 NO operating rate in Hz10 Hz no load0.5 Hz at Ie mechanical durability20000000 cycles [Uimp] rated impulse withstand voltage2.5 kV IEC 60947-1 [Ui] rated insulation voltage2000 V installation categoryII IEC 60664-1 tightening torque5.31 lbf.in (0.6 N.m) flat Ø 3.5 mm net weight0.89 lb(US) (0.405 kg) Environment max immunity to microbreaks5 ms dielectric strength2000 V IEC 60947-1 product certificationsDNVULCSAGLBVLROS (Lloyds register of shipping) IP degree of protectionIP2x IEC 60529 protective treatmentTC resistance to incandescent wire1382 °F (750 °C) 30 s IEC 60695-2-11 shock resistance15 gn 11 ms IEC 60068-2-27 resistance to radiated fields9.14 V/m (10 V/m) 26000000…1000000000 Hz)IEC 61000-4-3 level 3 resistance to fast transients2 kV level 3 IEC 61000-4-4 ambient air temperature for operation23…140 °F (-5…60 °C) IEC 61131-2 ambient air temperature for storage-40…176 °F (-40…80 °C) IEC 61131-2 pollution degree2 IEC 60664-1 Ordering and shipping details Category22375 - INTERFACE MODULE(ABA,R,S) Discount ScheduleCP2 GTIN00785901545279 Package weight(Lbs)0.35 kg (0.77 lb(US)) ReturnabilityYes Country of originLV Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsInstruction SheetFormatSizeAdd to My DocumentsCatalog PagesFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages64
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV20 / ABE7BV20E
a in mm
a in in.
R16S111 / R16S111E
R16S21 / R16S21•E
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Temperature Derating Curves(1)100 % of channels used(2)50 % of channels usedElectrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.