Sub-base with plug-in electromechanical relay ABE7 - 16 channels - relay 10 mmShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productModicon ABE7 product or component typeSub-base with plug-in electromechanical relay sub-base typeOutput sub-base [Us] rated supply voltage19...30 V IEC 61131-2 number of channels16 Complementary supply voltage typeDC product compatibilityABR7S21 contacts type and composition1 NO status LEDChannel status 1 LED per channel Green)Power ON 1 LED Green) polarity distributionPolarity distribution contact common per 2 groups of 8 channels short-circuit protection1 A internal fuse, 5 x 20 mm, fast blow PLC end) fixing modeBy clips 35 mm symmetrical DIN rail)By screws solid plate with fixing kit) maximum supply current1 A voltage drop on power supply fuse0.3 V [Ui] rated insulation voltage2000 V terminals/mounting rails300 V coil circuit/contact circuits IEC 60947-1 [Uimp] rated impulse withstand voltage2.5 kV installation categoryII IEC 60664-1 tightening torque5.31 lbf.in (0.6 N.m) flat Ø 3.5 mm net weight1.61 lb(US) (0.73 kg) Environment product certificationsCSABVULDNVGLLROS (Lloyds register of shipping) IP degree of protectionIP2x IEC 60529 resistance to incandescent wire1382 °F (750 °C) IEC 60695-2-11 shock resistance15 gn 11 ms IEC 60068-2-27 vibration resistance2 gn 10…150 Hz)IEC 60068-2-6 resistance to electrostatic discharge4 kV contact) level 3 IEC 61000-4-28 kV air) level 3 IEC 61000-4-2 resistance to radiated fields9.14 V/m (10 V/m) 26000000…1000000000 Hz)IEC 61000-4-3 level 3 resistance to fast transients2 kV level 3 IEC 61000-4-4 ambient air temperature for operation23…140 °F (-5…60 °C) IEC 61131-2 ambient air temperature for storage-40…176 °F (-40…80 °C) IEC 61131-2 pollution degree2 IEC 60664-1 Ordering and shipping details Category22375 - INTERFACE MODULE(ABA,R,S) Discount ScheduleCP2 GTIN00785901446552 ReturnabilityNo Country of originLV Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 253.6 KBDate 1/13/05China RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsMarine certificateFormatSizeAdd to My Documents
- All Languages13
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20, ABE7BV10E / BV20E
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load(2)ABR7S21 (1 “F” "SPST") Ith = 5 A (supplied)
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Temperature Derating Curves(1)100 % of channels used(2)50 % of channels usedElectrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.