power plug-in relay - Zelio RPM - 2 C/O - 12 V DC - 15 A - with LEDShow more characteristics
Product availabilityNon-Stock - Not normally stocked in distribution facility
Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPM contacts type and composition2 C/O [Uc] control circuit voltage12 V DC [Ithe] conventional enclosed thermal current15 A -40…131 °F (-40…55 °C) status LEDWith control typeWithout lockable test button utilisation coefficient20 % Complementary shape of pinFlat [Ui] rated insulation voltage250 V IEC300 V CSA300 V UL [Uimp] rated impulse withstand voltage4 kV 1.2/50 µs contacts materialAgNi [Ie] rated operational current15 A 277 V AC) UL15 A 28 V DC) UL15 A 250 V AC) NO IEC15 A 28 V DC) NO IEC7.5 A 250 V AC) NC IEC7.5 A 28 V DC) NC IEC maximum switching voltage250 V IEC Resistive load current15 A 250 V AC15 A 28 V DC maximum switching capacity3750 VA420 W minimum switching capacity170 mW 10 mA, 17 V operating rate<= 1200 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability10000000 cycles electrical durability100000 cycles resistive Average coil consumption0.85 W drop-out voltage threshold>= 0.1 Uc DC Operate time20 ms at nominal voltage Release time20 ms at nominal voltage Average coil resistance160 Ohm 68 °F (20 °C) +/- 10 % rated operational voltage limits9.6...13.2 V DC protection categoryRT I test levelsLevel A operating positionAny position pollution degree3 safety reliability dataB10d = 100000 net weight0.08 lb(US) (0.036 kg) device presentationComplete product Environment dielectric strength1500 V AC between contacts micro disconnection2000 V AC between coil and contact reinforced2000 V AC between poles basic standardsUL 508CSA C22.2 No 14EN/IEC 61810-1 product certificationsEACULCSAREACHRoHS ambient air temperature for storage-40…185 °F (-40…85 °C) ambient air temperature for operation-40…131 °F (-40…55 °C) vibration resistance3 gn +/- 1 mm 10…150 Hz)5 cycles in operation5 gn +/- 1 mm 10…150 Hz)5 cycles not operating Degree of protection (Housing only)IP40 EN/IEC 60529 shock resistance15 gnin operation30 gnnot operating Ordering and shipping details Category21127 - ZELIO ICE CUBE RELAYS Discount ScheduleCP2 GTIN00785901708797 Package weight(Lbs)0.04 kg (0.08 lb(US)) ReturnabilityNo Country of originCN Offer Sustainability Sustainable offer statusGreen Premium product California proposition 65WARNING: This product can expose you to chemicals including: Nickel compounds and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. Contractual warranty Warranty18 months
CatalogFormatSizeAdd to My DocumentsSize pdfSize 6 MBDate 5/12/19DescriptionSection 23 of Digest 178 Catalog includes selection information for general purpose relays, industrial relays, solid state relays, timers, control and measurement relays, power supplies and Zelio™ interface modules.and legacy relays. Replaces Digest 177 section 23; 0100CT1501_SEC-23China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Pin Side View
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.