Schneider Electric USA Website

Welcome to our website.

Select your location

View all Altivar IMC - Drives Controller
Schneider Eletric VW3A3521S0 Picture
Discontinued

VW3A3521S0

Schneider Eletric VW3A3521S0 Picture
Discontinued
VW3A3521S0

ATV IMC drive controller card type S solutions

Show more characteristics
VW3A3521S0  has not been replaced. Please contact your customer care center for more information.
  • 755.00 USD
    Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
The maximum number of products that can be compared is 4

  • Main
    range of product
    Altivar IMC
    product or component type
    Drive controller card
    module configuration
    Configured and programmed with SoMachine software
    product specific application
    For solutions
    discrete I/O number
    16
    analogue I/O number
    4
    Complementary
    discrete input number
    6 input
    4 fast input
    discrete input type
    Configurable as single phase counter LI51, LI59
    Configurable for incremental encoder LI51, LI52
    Configurable for incremental encoder LI59, LI60
    discrete input logic
    Sink or source (positive/negative) input
    Positive logic (sink) fast input
    discrete input voltage
    24...30 V
    discrete input voltage type
    DC
    number of common point
    1 analogue output
    1 analogue input
    3 logic input
    voltage state 1 guaranteed
    >= 11 V logic input
    voltage state 0 guaranteed
    <= 5 V logic input
    input impedance
    500 Ohm analogue output
    4.4 kOhm logic input
    network frequency
    <= 100 kHz fast input (counter mode)
    <= 100 kHz fast input (encoder mode)
    discrete output number
    6 transistor output
    discrete output logic
    Positive logic (source)
    discrete output voltage
    24...30 V DC transistor output
    discrete output current
    2 A transistor output LO51...LO56)
    output compatibility
    Level 1 PLC transistor output
    absolute accuracy error
    +/- 1 % for a temperature variation 60 °C analogue input
    +/- 1 % for a temperature variation 60 °C analogue output
    short-circuit protection
    With output and fast output
    overvoltage protection
    With output and fast output
    overload protection
    With output and fast output
    analogue input number
    2
    analogue input type
    Configurable voltage or current
    analogue input range
    0...5 V
    0...20 mA
    analogue input resolution
    10 bits
    analogue output number
    2
    analogue output range
    0...20 mA
    analogue output resolution
    12 bits
    linearity error
    +/- 0.4 % of maximum value analogue input
    +/- 0.2 % of maximum value analogue output
    [Us] rated supply voltage
    24 V DC
    supply voltage limits
    19…30 V
    memory description
    Internal RAM 2000 kB
    Flash 2000 kB
    Internal data storage (FRAM) 64 ko
    Program memory 1 Mo
    integrated connection type
    MDI/MDX port RJ45 Ethernet 10BASE-T/100BASE-TX
    Programmation port mini B USB 480 Mbit/s
    CANopen male SUB-D 9 CANopen master
    CANopen feature profile
    DR 303-1
    DS 301 V4.02
    level or class
    Class M20 - 32 CANopen
    communication service
    320 TPDOs and RPDOs maxi
    10 PDOs per slave (transmission/emission)
    transmission rate
    1000 kbit/s 65.62 ft (20 m) CANopen
    500 kbit/s 328.08 ft (100 m) CANopen
    250 kbit/s 820.21 ft (250 m) CANopen
    125 kbit/s 1640.42 ft (500 m) CANopen
    50 kbit/s 3280.84 ft (1000 m) CANopen
    20 kbit/s 8202.10 ft (2500 m) CANopen
    local signalling
    ETH (Ethernet activity) 1 LED green/yellow)
    NS (Network Status) 1 LED green/red)
    MS (Module Status) 1 LED green/red)
    CAN (CANopen activity) 1 LED green/red)
    USER (programmable) 1 LED green/red)
    electrical connection
    1 connector with removable screw terminal block - 3 contacts - <= 1 x 1.5 mm² - AWG 16 for connecting the 24 V DC power supply
    3 connectors with screw terminal block - <= 1 x 1.5 mm² - AWG 16 for inputs/outputs
    1 connector - mini B USB for programming with SoMachine software
    1 male connector - SUB-D 9 for connection to the CANopen bus
    1 connector - RJ45 for programming with SoMachine software/Ethernet Modbus TCP network
    tightening torque
    2.21 lbf.in (0.25 N.m)
    associated complete product
    TCSXCNAMUM3P
    ATV61
    ATV71
    product weight
    0.41 lb(US) (0.185 kg)
    Ordering and shipping details
    Category
    22135-ATV61-71 ACCESSORIES
    Discount Schedule
    CP4C
    GTIN
    00785901685807
    Package weight(Lbs)
    0.89 lb(US) (0.404 kg)
    Returnability
    No
    Country of origin
    ID
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • All Languages6
    • English3
    • Chinese2
    • French4
    • German2
    • Italian2
    • Spanish3
    User guide
    Format
    Size
    Date
    Add to My Documents
    SoMachine Compatibility and Migration, User Guide (Version 06)
    Description
    This document provides information to help you maintain the compatibility of your SoMachine application, project, device firmware, Vijeo-Designer application, device description, and other aspects of your installation, when migrating to more advanced versions of SoMachine and its supporting libraries and software.
    Size pdf
    Size 560.2 KB
    Date 1/2/18
    Description
    This document provides information to help you maintain the compatibility of your SoMachine application, project, device firmware, Vijeo-Designer application, device description, and other aspects of your installation, when migrating to more advanced versions of SoMachine and its supporting libraries and software.
    SoMachine - Compatibilité et migration, Guide utilisateur (Version 06)
    Description
    Ce document fournit des informations qui vous aident à maintenir la compatibilité de votre application SoMachine, projet, micrologiciel d’équipement, application Vijeo Designer, description d’équipement et d’autres aspects de votre installation, lors de la migration vers des versions plus évoluées de SoMachine ainsi que leurs bibliothèques et logiciels.
    Size pdf
    Size 587.2 KB
    Date 2/1/18
    Description
    Ce document fournit des informations qui vous aident à maintenir la compatibilité de votre application SoMachine, projet, micrologiciel d’équipement, application Vijeo Designer, description d’équipement et d’autres aspects de votre installation, lors de la migration vers des versions plus évoluées de SoMachine ainsi que leurs bibliothèques et logiciels.
    ATV IMC Drive Controller, Guide d'installation (Version 08)
    Description
    Les objectifs de ce document sont les suivants :- de vous expliquer comment installer et utiliser votre Contrôleur de Machine Intégré- de vous expliquer comment connecter la carte optionnelle ATV IMC à un dispositif de programmation équipé du logiciel SoMachine- de vous aider à comprendre comment interfacer la carte optionnelle ATV IMC avec des modules d’E/S et d’autres dispositifs- de vous aider à vous familiariser aux caractéristiques de la carte optionnelle ATV IMC.
    Size pdf
    Size 2.4 MB
    Date 4/1/14
    Description
    Les objectifs de ce document sont les suivants :- de vous expliquer comment installer et utiliser votre Contrôleur de Machine Intégré- de vous expliquer comment connecter la carte optionnelle ATV IMC à un dispositif de programmation équipé du logiciel SoMachine- de vous aider à comprendre comment interfacer la carte optionnelle ATV IMC avec des modules d’E/S et d’autres dispositifs- de vous aider à vous familiariser aux caractéristiques de la carte optionnelle ATV IMC.
    SoMachine - Compatibilidad y migración, Guía del usuario (Version 06)
    Description
    Este documento proporciona información para ayudarle a mantener la compatibilidad de la aplicación de SoMachine, el proyecto, el firmware de dispositivo, la aplicación de Vijeo-Designer, la descripción del dispositivo y otras cuestiones relativas a la instalación al migrar a versiones más avanzadas de SoMachine y sus softwares y bibliotecas compatibles.
    Size pdf
    Size 572.4 KB
    Date 2/1/18
    Description
    Este documento proporciona información para ayudarle a mantener la compatibilidad de la aplicación de SoMachine, el proyecto, el firmware de dispositivo, la aplicación de Vijeo-Designer, la descripción del dispositivo y otras cuestiones relativas a la instalación al migrar a versiones más avanzadas de SoMachine y sus softwares y bibliotecas compatibles.
    CAD
    Format
    Size
    Date
    Add to My Documents
    CAD for VW3A3521S0: ATV IMC drive controller card type S solutions (Version 1.0)
    Description
    You will be redirected to the ThomasNet website. Then you could download this CAD model in more than 15 different 2D or 3D CAD formats.
    CAD for VW3A3521S0: ATV IMC drive controller card type S solutions (Version 1.0)
    Description
    You will be redirected to the ThomasNet website. Then you could download this CAD model in more than 15 different 2D or 3D CAD formats.
    Instruction Sheet
    Format
    Size
    Date
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Compare products: /