You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
The motor is quite noisy while running
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
ATV320 is creating too much motor noise.
Resolution:
Options include:
Set noise reduction (nrd) to yes. This creates a random frequency modulation which helps prevent a resonance.
Conf > FuLL > drC- > nrd = YES
Increase the switching frequency (SFr). This may also increase the heat generated by the drive.
Conf > FuLL > drC- > SFr: (there is a range between 2 to 16kHz depending on the drive size).
Consider mounting characteristics to a machine. Use mechanical joints (silent block) between the motor and the frame of the machine. It will help to suppress low frequency vibrations.
The motor is quite noisy while running
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
ATV320 is creating too much motor noise.
Resolution:
Options include:
Set noise reduction (nrd) to yes. This creates a random frequency modulation which helps prevent a resonance.
Conf > FuLL > drC- > nrd = YES
Increase the switching frequency (SFr). This may also increase the heat generated by the drive.
Conf > FuLL > drC- > SFr: (there is a range between 2 to 16kHz depending on the drive size).
Consider mounting characteristics to a machine. Use mechanical joints (silent block) between the motor and the frame of the machine. It will help to suppress low frequency vibrations.
Released for:Schneider Electric Vietnam
