You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Yes, It is possible to update the BMENUA0100 module firmware via the SERVICE port of the M580 CPU:
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
Released for:Schneider Electric Vietnam
