Issue:
How do you wire the motor of a PowerPacT P frame breaker?

Product Line:
Circuit Breakers

Resolution:
The PowerPacT P frame circuit breaker can be purchased with an internal motor operator to allow electrical operation of the breaker from a remote location. The motor must be factory installed.
When the breaker is ordered with the motor, it will include

• motor
• opening coil
• closing coil

The desired voltage rating of the motor must be specified when ordering the breaker, and the opening and closing coils will then automatically have that same voltage rating (voltage supplied by the customer).
The breaker cover must be removed to access the wiring terminals. Electrical connections to the motor and coils are made as shown in the picture below.
In addition, the characteristics of the motor, trip coil, and close coil are shown below.

Released for:Schneider Electric Canada