How can I setup Vijeo Citect to communicate to a controller via Modbus Plus using the TSXCUSBMBP adapter?| Schneider Electric Česká republika

Jak vám dnes můžeme pomoci?

How can I setup Vijeo Citect to communicate to a controller via Modbus Plus using the TSXCUSBMBP adapter?

This documents explains the steps involved in configuring Vijeo Citect to communicate to a controller via Modbus Plus protocol.

This procedure uses the Vijeo Citect MBPLUS Driver.

1) Configure the I/O Server, Boards, Ports and I/O Devices as shown below:

2) Testing with a Quantum / Unity Controller which requires to select the MBPLUS20 Protocol.

Attachments

3) Install the latest version of the MBPLUS driver. Note: you will need to install the latest version of the Modbus Plus MBx driver.

Publikováno pro: Schneider Electric Česká republika

Publikováno dne:22. 3. 2013Datum poslední úpravy:2. 3. 2023

Řada:

Citect SCADA

Řada:

Citect SCADA