Error “Impossible to create a new DTM object” is displayed adding a Sepam40/60/80 DTM in Control Expert V14.0.
After installing the Generic Modbus DDXML DTM library SV 2.03 and updating the DTM Catalog we can see that Sepam40, Sepam60 and Sepam80 DTMs (SV 02.08) are present.
Problem is that with the Ecostruxure Control Expert V14.0 when one of these three references is added the error message “Impossible to create a new DTM object” is displayed.
This is a known issue and a specific Control Expert HF will be published soon, ControlExpert_V140_HF0507367R.
Note: Other Devices DTMs coming with this Generic Modbus DDXML DTM library SV 2.03 are not concerned by this FAQ.
Problem is that with the Ecostruxure Control Expert V14.0 when one of these three references is added the error message “Impossible to create a new DTM object” is displayed.
This is a known issue and a specific Control Expert HF will be published soon, ControlExpert_V140_HF0507367R.
Note: Other Devices DTMs coming with this Generic Modbus DDXML DTM library SV 2.03 are not concerned by this FAQ.
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.