How to get and provide the Control-Expert’s application used by the PLC after an issue in PLC ?
1/ Open the application in Control-Expert and connect to the PLC by choosing "PLC->Connect" command or clicking on "Connect" icon
2/ Check if the opened PLC application into Control-Expert is identical to the one stored into the PLC by checking if "Equal" is set into the status bar :
If Not "EQUAL", upload the application from the PLC to the PC in Control-Expert by choosing "PLC->Transfert Project from PLC" command or clicking on "Transfert Project from PLC" icon : 
Then, check that "EQUAL" status is set into the status bar.
3/ Provide the *.sta file available in the customer folder (or archive the application file in *.sta format)
2/ Check if the opened PLC application into Control-Expert is identical to the one stored into the PLC by checking if "Equal" is set into the status bar :
Then, check that "EQUAL" status is set into the status bar.
3/ Provide the *.sta file available in the customer folder (or archive the application file in *.sta format)
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.