What could be the reason that USB connection is not working on M340 ?
Issue
When the USB cable is connected on M340 with a PC, it could happened that the driver is well set like on the picture below :
However, in driver manager you cannot see the IP address set 90.0.0.1 and 90.0.0.2 as below
Resolution
One of the reason it’s that the service “telephonie” is not running. Please make sure that this service in running in automatic as follow :
Product line
PLC USB Driver, M340, M580
Environment
Windows
When the USB cable is connected on M340 with a PC, it could happened that the driver is well set like on the picture below :
However, in driver manager you cannot see the IP address set 90.0.0.1 and 90.0.0.2 as below
Resolution
One of the reason it’s that the service “telephonie” is not running. Please make sure that this service in running in automatic as follow :
Product line
PLC USB Driver, M340, M580
Environment
Windows
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.