What is the VA rating for CL1/CL2 circuit on the ATS480 softstart. This is needed to select fuses to protect the softstart.| Schneider Electric Česká republika

Prohledejte časté dotazy

What is the VA rating for CL1/CL2 circuit on the ATS480 softstart. This is needed to select fuses to protect the softstart.

The voltage range is clearly documented in the manual:

voltage

However the VA is not as easily found, but required to size protection for the circuit.

Publikováno pro:Schneider Electric Česká republika

Publikováno dne:17. 5. 2023Datum poslední úpravy:17. 5. 2023

Řada:

Altivar Soft Starter ATS 480

Řada:

Altivar Soft Starter ATS 480