How to upgrade your NMC2 & NMC3 firmware using the NMC Firmware Update Utility
Issue:
The customer asked how to upgrade the firmware through the utility tool.
Product line:
NMC2, NMC3
Environment:
AP9630, AP9631, AP9640 & AP9641
Cause:
Web interface displays a UPS "not recognized" error or the customer is installing a new NMC.
Resolution:
Please follow the next steps.
1. Access the Downloads page.
2. Locate firmware for the product by NMC model (ie AP9630).
(NOTE: Some products' firmware is not available on the download page. Contact Technical Support for support on products not found on the firmware download page.)
3. Run the application and enter the following information.
- Host (Ip address of the unit)
- UserName and Password of the NMC
- Click on Start Update
If you notice that the application stops with the selected protocol (SCP for this case) please try with FTP.
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.