M580 Hot Standby Device DDT type : T_M_ECPU_HSBY vs T_M_ECPU_HSBY_EXT
Issue :
When working with M580 Hot Standby application, why do I sometimes see the Device DDT type T_M_ECPU_HSBY and other times T_M_ECPU_HSBY_EXT
Products :
Control Expert (Unity Pro)
M580 Hot Standby
Answer :
This is based on the application level of your application.
If you have an application defined with an M580 of 2.70 and lower, you will see the T_M_ECPU_HSBY.
If you have an application defined with an M580 of 2.80 and higher, you will see the T_M_ECPU_HSBY_EXT.
In the PDF attached the differences between the 2 types have been identified.
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.