Is the ZBZ58 compatible with Harmony XALK control stations ?
The ZBZ58 bellows is not designed to be installed with a ZB4BZ1905 guard. Installing the bellows together with the guard may cause difficulties for the emergency stop head to automatically return to its initial position after reset. For this reason, such an installation is not recommended.
I have tested other guards as well, but unfortunately none of them is wide enough to allow proper operation of the emergency stop pushbutton when used with a bellows.
Publikováno pro: Schneider Electric Česká republika
Potřebujete pomoc?
Nástroj pro výběr produktů
Rychle a snadno vyhledávejte správné produkty a příslušenství pro vaše aplikace.
Získejte nabídku
Poptejte se nás online a náš lokální specialista se s vámi spojí!
Kde nakoupit?
Jednoduše najděte nejbližšího distributora výrobků Schneider Electric ve vašem okolí.
Centrum nápovědy
Zdroje podpory pro všechny své potřeby najdete na jednom místě.