Is there CE marking on the HV circuit breakers and contactors ?
The Low Voltage Directive (LVD) 2006/95/EC) applies to low voltage equipment, also used within high-voltage switchgear and controlgear e.g. control circuits, relays of protection, measuring and metering devices, terminal blocks etc.
This equipment, when procured from the market place, has to comply with the LVD and to carry the CE Marking.
H.V. switchgear and controlgear will not carry the CE Marking in relation to the LVD because that would be illegal due to high-voltage products falling outside its scope.
So, all our circuit breakers are not subject to such marking as these high voltage switchgears and do not fall within the scope of the Directive.
They are not accessible to the public and exclusively reserved for use by advised and trained persons, are therefore not covered by the Low Voltage Directive and therefore require no EC marking.
This equipment, when procured from the market place, has to comply with the LVD and to carry the CE Marking.
H.V. switchgear and controlgear will not carry the CE Marking in relation to the LVD because that would be illegal due to high-voltage products falling outside its scope.
So, all our circuit breakers are not subject to such marking as these high voltage switchgears and do not fall within the scope of the Directive.
They are not accessible to the public and exclusively reserved for use by advised and trained persons, are therefore not covered by the Low Voltage Directive and therefore require no EC marking.
Publicado para: Schneider Electric España
¿Necesitas ayuda?
Selector de productos
Encuentra rápida y fácilmente los productos y accesorios adecuados para tus aplicaciones.
Pedir presupuesto
Comienza tu consulta de ventas en línea y un experto se pondrá en contacto contigo.
¿Dónde comprar?
Encuentra fácilmente el distribuidor de Schneider Electric más cercano a ti.
Centro de ayuda
Encuentra recursos de soporte para todas tus necesidades en un solo lugar.