{"searchBar":{"inputPlaceholder":"Hae hakusanalla tai kysymyksellä","searchBtn":"Hae","error":"Syötä hakusana"}}
{}

Tervetuloa Schneider Electricin verkkosivustolle

Tervetuloa sivustollemme.
 

Valitse sijaintisi

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Kyllä","noButton":"Ei","feedback":{"title":"Miten voimme parantaa toimintaamme?"},"submitButton":"Lähetä","successMessage":"Kiitos palautteestasi","title":"Oliko tästä apua?","feedbackPercentLabel":"henkilön mielestä tästä oli hyötyä","captcha":{"error":"Valitse valintaruutu"}}}
Hae usein kysyttyjä kysymyksiä

How to manage terminal block in eDesign Small Building application

Issue: Managing terminal block in Front View of eDesign small building application
Product Line: eDesign for Small Building https://edesign-630.se.com/
Cause: Install terminal blocks in the switchboard.
Resolution:
  1. Go to the Front View in eDesign Small Building https://edesign-630.se.com/



On left panel, you will see “Rail + Front Plate for Terminal Blocks tag.”

 
  1.  Drag and drop the tag in all the possible places in the  switch board as shown below.