Roll over image to zoom in
VW3A3401
Environmental Data
Total lifecycle Carbon footprint
7
Use Better
Packaging made with recycled cardboard
No
Use Again
Take-back
No
This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
| Range of product | Altivar |
|---|---|
| Product or component type | Encoder interface card |
| Range compatibility | Altivar Lift Altivar 61 Altivar 71Q Altivar 71 Altivar 61Q |
| Discrete output type | Differential |
| Communication port protocol | RS422 |
| [Us] rated supply voltage | 5 V DC (voltage limits: 5…5.5 V) |
| Number of pulses per revolution | 10000 for ATV71H......383 5000 for all ATV61 drives 5000 for ATV71H...M3 5000 for ATV71H...M3X 5000 for ATV71H...N4 |
| Maximum supply current | 0.2 A |
|---|---|
| Protection type | Short-circuit protection Overload protection |
| Maximum cable distance between devices | 50 m |
| Maximum operating frequency | 300 kHz |
| Input signal | A B Compliment of A Compliment of B |
| Input impedance | 440 Ohm |
| Electrical connection | Terminal, connection capacity: 0.2 mm² (AWG 24) <25 m cable length, encoder, 100 mA at 4.5 V Terminal, connection capacity: 0.5 mm² (AWG 20) <25 m cable length, encoder, 200 mA at 4.5 V Terminal, connection capacity: 0.5 mm² (AWG 20) <50 m cable length, encoder, 100 mA at 4.5 V Terminal, connection capacity: 0.75 mm² (AWG 18) <50 m cable length, encoder, 200 mA at 4.5 V |
| Net weight | 0.2 kg |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.500 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.000 cm |
| Package 1 Weight | 142.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 1.479 kg |
| Warranty | 12 months |
|---|
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing “Use Better, Use Longer, Use Again” campaign to extend product lifetimes and recyclability.
Total lifecycle Carbon footprint
7
Environmental Disclosure
Use Better
Packaging made with recycled cardboard
No
Packaging without single use plastic
No
Pro-active compliance (Product out of EU RoHS legal scope)
SCIP Number
Cc2968dc-a4a6-4061-8b47-03045426e4ec
Use Again
End of life manual availability
No need of specific recycling operations
Take-back
No
Need more information? Check our technical FAQs!
Easily find answers to the most frequently asked questions.
