What are the main differences between feeder and motor mode with Easergy P3?
Issue:
Need to understand the main differences between feeder mode and motor mode in Easergy/Powerlogic P3.
Product Line:
- Easergy/ Powerlogic P3
- Applies to Easergy/Powerlogic P3 relays that support feeder and motor application modes
Environment:
- Easergy/Powerlogic P3 relay configuration
- Application mode selection
- Protection function configuration
Cause:
Feeder mode and motor mode use different scaling references and enable different protection functions based on the selected application.
Resolution:
- In feeder mode, current scaling is based on the CT nominal.
- In motor mode, current scaling is based on the motor nominal current (Imot).
- Some protection functions appear or disappear depending on the selected mode.
- In feeder mode, feeder-related functions such as auto recloser are available.
- In motor mode, motor-related functions such as motor start-up supervision and other motor protection functions are available.
- Common protection functions, such as overcurrent protection, may be available in both modes, but their settings and scaling are interpreted according to the selected application mode.
- If the expected function is not visible, verify that the relay is configured for the correct application mode.
פורסם עבור: שניידר אלקטריק ישראל
זקוק לעזרה?
בורר מוצרים
חפשו ברשת מפיצים מאומתים עם יותר מ-15,000 נקודות מכירה ברחבי העולם.
קבלת הצעת מחיר
התחילו את בקשת הקניה בצורה מקוונת ונציג מכירות ייצור עמכם קשר.
היכן לקנות?
אתר בקלות את מפיץ Schneider Electric הקרוב ביותר אליך.
מרכז העזרה
חפשו משאבי תמיכה לכל הצרכים שלכם במקום אחד.