EM6400NG is Password Protected with Default Password as 0000.
To change the password Enter into the Setup, Setup screen enables you to configure various setup parameters.
The meter’s display screen and buttons allow you to navigate to and edit the
required parameters.
To enter into setup:
1. Press and hold the Up key and Down key simultaneously for 2 seconds.
2. Enter the password. Default password is 0000.
3. Press OK key to enter setup.
4. Press down Key to navigate in setup menu to Reach the PASS Option.
5. PASS option will show default Password as 0000, Press Ok to Change the Password to any number from 0000-9999.
6. Press OK to Accept the New Password.
7. Press Up and Down Key Together to Save the Changes and Press ok.
.
To change the password Enter into the Setup, Setup screen enables you to configure various setup parameters.
The meter’s display screen and buttons allow you to navigate to and edit the
required parameters.
To enter into setup:
1. Press and hold the Up key and Down key simultaneously for 2 seconds.
2. Enter the password. Default password is 0000.
3. Press OK key to enter setup.
4. Press down Key to navigate in setup menu to Reach the PASS Option.
5. PASS option will show default Password as 0000, Press Ok to Change the Password to any number from 0000-9999.
6. Press OK to Accept the New Password.
7. Press Up and Down Key Together to Save the Changes and Press ok.
.
Released for:Schneider Electric India
