How to Set an IP-Address on TeSys-T using an M580 PLC DHCP Server

Product Line:

Tesys-T Motor Controller .

M580 PLC Product Range.

Resolution:

There are quite a few ways to set the IP address in an LTMR__E_ device and one off them is using an M580 PLC DHCP Server

Using DHCP Server

1. Set the Rotary Switches on the TeSys T.
2. Creating M580 PLC and add the TeSys T DTM .
3. Add TeSys T ,Device Name to DHCP Server .
4. Build and download the M580 Application.
5. Verify the assigned TeSys T address

NOTE:

Please refer the TeSys T Guide Page no 30-31 for more details on Rotary Switches & Device name.

Released for: Schneider Electric New Zealand