Yes, the M221 does have a start in run feature. A video demonstration can be found below using SoMachine Basic 1.6 SP2 current software as of August 2018.
The off line mode you can do the following;
Select the Programming tab
From the Programming tab select Tasks
Under the Tasks tab select Behavior
At the bottom of the page you will see "Starting Mode"
From there you have 4 options
1 Start in Previous state
2 Start in Stop
3 Start in Run
4 Unconditional Start in Run
The off line mode you can do the following;
Select the Programming tab
From the Programming tab select Tasks
Under the Tasks tab select Behavior
At the bottom of the page you will see "Starting Mode"
From there you have 4 options
1 Start in Previous state
2 Start in Stop
3 Start in Run
4 Unconditional Start in Run
Publicerad för: Schneider Electric Sverige
