How Can I Determine if my Accutech Base Radio is equipped with ModBUS Capabilities?

Hur kan vi hjälpa dig idag?

Current Versions of Base Radios

All models of BR20 (Din Rail mounted) base radios are equipped with ModBUS.
Current model numbers of the BR10 (NEMA 4X enclosure) TBUABR10-xxxxxxx are equipped with ModBUS.

Previous Versions

Model AC-BR10 (similar to the current TBUARBR10 models)

BR10 with ModBUS would have a model number similar to AC-BR10-TX21N00, where the 1 indicates ModBUS is available. A model number similar to AC-BR10-TX20N00, with a zero, would indicate no ModBUS capabilities are available on this model.

Model WI-BR (similar to the current TBUARBR10 models)

A different model number scheme was used when Adaptive Wireless had the Accutech product line.
A model number such as WI-BR-I-XP-MOD would have been enabled with ModBUS. A model number that does NOT have -MOD may or may not have ModBUS.

If -MOD is not listed in the model number, you will then need to have a look at the circuit boards inside the base radio. A WI-BR with three boards would have ModBUS, whereas there would be no ModBUS capabilities if only two boards were present.

WI-BR with ModBUS (3 boards present)

WI-BR without ModBUS (2 boards present)

If you have a Base Radio without Modbus and wish to enable it, the upgrade would be more expensive than purchasing a new radio. It is not a cost-effective upgrade and can not be performed.