How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port

Question

Accepted Answer

Use the following method with the VMWare configured in NAT mode:

1. Configure SoMachine the communication via "active path":
Project Settings
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
Add gateway
3.Select the new gateway and Scan it
Scan Network
4. Now you can connect to the M251

How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port

Publicerad för: Schneider Electric Sverige

Produkter

Support

Företag

Snabblänkar

Partners

Hållbarhet

Evenemang

Trender
opens new tab

How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port

Publicerad för: Schneider Electric Sverige

Produkter

Support

Företag

Snabblänkar

Partners:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Hållbarhet:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Evenemang:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Trender:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Partners

Hållbarhet

Evenemang

Trender
opens new tab