The M221 PLC does not go in RUN mode if I am plugged in only by USB cable
Issue:
While online (Logged in from the SoMchine Basic or EcoStruxure Machine Expert-Basic software) with a M221 PLC it is impossible to put it into Run mode.
Product Line:
Modicon M221 PLC
Environment:
PLC Configuration
Resolution:
If PLC is only powered with the USB connection, you can not put the PLC into Run mode. You need to supply the PLC with power on the appropriate terminals to be able to have it in RUN mode.
While online (Logged in from the SoMchine Basic or EcoStruxure Machine Expert-Basic software) with a M221 PLC it is impossible to put it into Run mode.
Product Line:
Modicon M221 PLC
Environment:
PLC Configuration
Resolution:
If PLC is only powered with the USB connection, you can not put the PLC into Run mode. You need to supply the PLC with power on the appropriate terminals to be able to have it in RUN mode.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.