How to Connect Accutech BR20 to Wired Output Module
There are 3 possible part numbers for the Acute wired output module:
TBUM297526 - 4AO: 4 Channel Analog Output Module (4-20mA)
TBUM297527 - 8SW: 8-Point Switch Closure Output Module
TBUM297528 - 4AO-8SW: Channel Analog Output (4-20mA) & 8-Point Switch Closure Output Module
To be able to configure any of the above models with the BR20 Accutech Base Radio, a RS-485 connection must be used. Accutech Manager is used to configure the modules where outputs of Accutech Wireless field units can be mapped to the module. For initial set-up the part number TBUM297569 (USB Programming Cable) can be used.
TBUM297526 - 4AO: 4 Channel Analog Output Module (4-20mA)
TBUM297527 - 8SW: 8-Point Switch Closure Output Module
TBUM297528 - 4AO-8SW: Channel Analog Output (4-20mA) & 8-Point Switch Closure Output Module
To be able to configure any of the above models with the BR20 Accutech Base Radio, a RS-485 connection must be used. Accutech Manager is used to configure the modules where outputs of Accutech Wireless field units can be mapped to the module. For initial set-up the part number TBUM297569 (USB Programming Cable) can be used.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.