What are S1, S2,and S3 in the LH4N2 wiring diagram?
Issue:
S1, S2 and S3 buttons wiring diagram indication in LH4N2.
Product Line:
LH4N
Environment:
All
Cause:
Control wiring circuit
Resolution:
The S1, S2, and S3 are switch designations in the recommended wiring schemes. When these switches are wired as indicated the S1 is for freewheel stop operation, S2 is for soft start operation FWD, and S3 is for soft start REV.
S1, S2 and S3 buttons wiring diagram indication in LH4N2.
Product Line:
LH4N
Environment:
All
Cause:
Control wiring circuit
Resolution:
The S1, S2, and S3 are switch designations in the recommended wiring schemes. When these switches are wired as indicated the S1 is for freewheel stop operation, S2 is for soft start operation FWD, and S3 is for soft start REV.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.