Where is the access level in the ATV320 drive?
Issue:
Not able to find the access level (LAC) parameter in ATV320 drive
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
Trying to find the LAC parameter in ATV320 drive, but not able to find it.
Resolution:
On the keypad:
Go to ConF, Full and then look for LAC (access level)
Options are: Basic (bAS); Standard (Std); Advanced (Adv); Expert (EPr).
Expert will allow you to work without restrictions in the drive.
In SoMove:
Go to “Parameters” tab, then go to “Full” in the left side menus and it will show the Access level parameter in the right area.
Not able to find the access level (LAC) parameter in ATV320 drive
Product Line:
ATV320
Environment:
ATV320 all series
Cause:
Trying to find the LAC parameter in ATV320 drive, but not able to find it.
Resolution:
On the keypad:
Go to ConF, Full and then look for LAC (access level)
Options are: Basic (bAS); Standard (Std); Advanced (Adv); Expert (EPr).
Expert will allow you to work without restrictions in the drive.
In SoMove:
Go to “Parameters” tab, then go to “Full” in the left side menus and it will show the Access level parameter in the right area.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.