Why, in EcoStruxure Machine SCADA Expert, sometime the Site Code cannot be generated?
In EcoStruxure Machine SCADA expert, there are two kind of license
To find the Site Code, need to start "EcoStruxure Machine SCADA Expert 2020 Register" and select SoftKey
In some specific cases, the following error may occur
This FAQ will show how to avoid this error message
This article is application for EcoStruxure Machine SCADA Expert, all versions
This error may occur, when there are too much network card in the configuration.
The solution to be able to create the SiteCode in this situation, is to desactivate the not necessary network card and let only the main one.
In general this action is enough to fix the problem and generate the Site Code.
If the problem still occur, do not hesitate to contact the technical support
- Hardkey
- Softkey
To find the Site Code, need to start "EcoStruxure Machine SCADA Expert 2020 Register" and select SoftKey
In some specific cases, the following error may occur
This FAQ will show how to avoid this error message
This article is application for EcoStruxure Machine SCADA Expert, all versions
This error may occur, when there are too much network card in the configuration.
The solution to be able to create the SiteCode in this situation, is to desactivate the not necessary network card and let only the main one.
In general this action is enough to fix the problem and generate the Site Code.
If the problem still occur, do not hesitate to contact the technical support
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.