How to use the HMI BSC Network Configurator ?
The goal of this article is to explain How to use the Network Configurator tool on an HMI BSC.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.