Would like to use Machine Expert to program small IFM model CR7032 controller.

Issue:

I have a small IFM CR7032 controller that uses Codesys for its programmation.

Since the EcoStruxure Machine Expert software also uses Codesys to program the Schneider controllers, would it be possible to use it to program this IFM CR7032?

Product Line:

EcoStruxure Machine Expert (all versions)

Resolution:

EcoStruxure Machine Expert does not support controllers other than those from Schneider Electric. So the software will not allow to program an IFM CR7032 controller.

If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance: Support | Schneider Electric Global (se.com)

Publicerad för: Schneider Electric Sverige