NetBotz graphs plot only 2 data points
Issue:
NetBotz graphs have only 2 data points
Product Line:
NetBotz
Environment:
NBWL0755
NBRK0750
Cause:
NetBotz sensors that do not change will only show 2 data points in a graph. For instance, a door sensor that has not opened will have a closed State at the beginning of the graph and at the end. No other points will be recorded. The same will be seen for a temperature sensor if the temperature has not changed.
Conversely, if there have been multiple changes, you should see multiple points on the graph.
Resolution:
Upon checking Sensor data history excel, it shows all sensor data captured during this time period.
This function works as designed.
NetBotz graphs have only 2 data points
Product Line:
NetBotz
Environment:
NBWL0755
NBRK0750
Cause:
NetBotz sensors that do not change will only show 2 data points in a graph. For instance, a door sensor that has not opened will have a closed State at the beginning of the graph and at the end. No other points will be recorded. The same will be seen for a temperature sensor if the temperature has not changed.
Conversely, if there have been multiple changes, you should see multiple points on the graph.
Resolution:
Upon checking Sensor data history excel, it shows all sensor data captured during this time period.
This function works as designed.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.