Scadapack Workbench will not launch
If SCADAPack Workbench will not Launch, a potential solution is
- Open Event Viewer
- Go to Event Viewer>Windows Logs>Application
- Determine the Error, see example below
For SCADAPack Workbench CAM3:
- To Correct the issue, Open the Scadapack Workbench CD installation
- Go to the "\Prerequisites\VS2013 IsoShell" folder from the installation media
- Install the following application manually vs_isoshell and VS12-KB3107629
- After installing the applications manually restart your machine.
For SCADAPack Workbench CAM5:
- To Correct the issue, under the installer folder, Open the Workbench folder
- Go to the "\Prerequisites\VS2013 IsoShell" folder from the installation media
- Install the following applications manually vs_isoshell and VS12-KB3107629
- After installing the applications manually restart your machine.
If this does not help, please get in touch with your local support team for more help.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.