Can I use the WRITE_INPUT_xxxx to simulate the writing of a value of an I/O variable in a RIO network?
Issue:
The use of the WRITE_INPUT_xxxx with I/O module located in a remote I/O network
Product Line:
Control Expert, Unity Pro
Resolution:
It is not recommended to use WRITE_INPUT_xxxx EFB with RIO networks because the behavior in simulation mode could be different from PLC behavior. The input is set by the WRITE_INPUT_xxxx EFB but is overwritten by the value sent by the RIO scanner in the OUT phase of the PLC scan.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.