M580 Hot Standby Device DDT type : T_M_ECPU_HSBY vs T_M_ECPU_HSBY_EXT
Issue :
When working with M580 Hot Standby application, why do I sometimes see the Device DDT type T_M_ECPU_HSBY and other times T_M_ECPU_HSBY_EXT
Products :
Control Expert (Unity Pro)
M580 Hot Standby
Answer :
This is based on the application level of your application.
If you have an application defined with an M580 of 2.70 and lower, you will see the T_M_ECPU_HSBY.
If you have an application defined with an M580 of 2.80 and higher, you will see the T_M_ECPU_HSBY_EXT.
In the PDF attached the differences between the 2 types have been identified.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.