How to Trigger SBO Relays in the Graphic User Interface GUI
Issue:
Users need to execute Select-Before-Operate (SBO) commands through the SAGE RTU web interface GUI (Config@Web).
Product:
SAGE RTU 14x0, 2x00, 3030, 3030M
Environment:
Config@Web interface w/ HTTPS enabled, proper user roles configured, RTU in Remote mode
Cause:
The SBO command process requires specific steps and permissions within the Config@Web interface to ensure secure and accurate relay operations.
Resolution:
- Log in to the Config@Web interface using a Command-privileged account.
- Navigate to the Command tab and select Control.
- Choose the desired SBO point.
- Set Trip/Close and Execute Time if needed.
- Click Execute to trigger the command.
- Ensure:
- The RTU is in Remote mode.
- HTTPS and user roles are properly configured.
- All actions will be recorded in the Command Log for auditing.
- For detailed instructions, refer to the Config@Web manual (page 172+) attached in the related tab.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.