Is EcoStruxure Machine SCADA Expert v2023 compatible with the HMIG5U21?
Issue:
Can Machine SCADA Expert v2023 run correctly in the Harmony GTU HMI open box HMIG5U21?
Product:
- EcoStruxure Machine SCADA Expert v2023
- HMIG5U21
Environment:
- HMI Configuration Software in Windows
- Harmony GTU HMI open box with Windows 10 IoT
Resolution:
Short answer: In theory it is compatible but it is not recommended.
EcoStruxure Machine SCADA Expert v2023 have the following requirements:
From: EcoStruxure™ Machine SCADA Expert , Help Manual - 07/2024 - P.38
The HMIG5U21 barely meets these requirements:
From: HMIG5U21 product data sheet
Note: Keep on mind that the actual available memory might be less than 4 GB, especially if the OS and other tasks are running.
From: Harmony GTU, User Manual - 01/2022 - P.12
The HMIG5U21 is theoretically compatible with EcoStruxure Machine SCADA Expert v2023; however, it is not recommended for Machine SCADA Expert applications. Machine SCADA Expert projects are typically complex and may require even more system resources.
Related resources:
Title: EcoStruxure™ Machine SCADA Expert, Help Manual
Title => "Harmony GTU, User Manual"
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.