BCIM Functionality Requirements with Micrologic Active
Make sure to use EPC 2.39 or above to upgrade Micrologic Active trip unit toFirmware version 004.004.003 or later
What happens if the Micrologic Active firmware is not updated?
You may experience issues such as:
-
BCIM not appearing in the EPC
-
Incorrect or missing measurement data
-
Communication errors on the trip unit
Note : Ensure 24V auxiliary supply provided to BCIM separately through the 6-Pin COM port.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.