How to Add a Custom System Message on APC Network Management Card (NMC) Web Interface?
Issue:
End users may want to display a reminder or warning message on the login page of an APC Network Management Card (NMC).
Product Line:
- Network Management Card 2 (NMC2 v6.x.x and higher)
- Network Management Card 3 (NMC3 all firmware)
Resolution:
Before you can create or edit a system message, ensure that you have the appropriate administrative access to the NMC.
Steps:
- Log in to the APC Network Management Card (NMC) web interface.
- Navigate to Configuration → General → Identification.
3. Under Identification, look for System Message field then enter the custom message you want displayed at login.
4. Click Apply to save your changes.
5. Log out of the NMC to verify that the changes have been applied.
Your custom system message will now appear on the NMC login screen.
If you have any clarifications or need assistance, please feel free to contact us at 1‑800‑800‑4272 or chat with our technical support representatives.
Publicerad för: Schneider Electric Sverige
Discontinued
Discontinued
Discontinued
Discontinued