Modicon M340
Programmerbar styrenhet i mellanklass för industriprocesser och infrastruktur
Del av Modicon
Körprestanda med enkelhet och integrerade funktioner
-
Visa fler dokumentLanguage Format Storlek Datum Katalog Telefast Pre-wired system : Modicon ABE7 IP20 connection sub-bases, Modicon ABE9 IP67 passive splitter boxes (Version 3.2) engelska pdf 10.8 MB 2019-10-04 Catalog EcoStruxure Control Expert and OPC software (Version 7.0) engelska pdf 5.6 MB 2019-03-07 Catalogue Modicon M340 automation platform - English version 2014/09 (web pdf format) (Version 3.1) engelska pdf 8 MB 2014-10-29 Användarmanual Firmware Compatibility Rules - Modicon M580, Modicon Momentum, and Modicon X80 I/O Modules (Version 02) BeskrivningThis document addresses the firmware compatibility, exceptions, and recommendations for Modicon modules.engelska pdf 141.5 KB 2019-03-01 BeskrivningThis document addresses the firmware compatibility, exceptions, and recommendations for Modicon modules.Modicon M580, M340 and X80 I/O Platforms, Standards and Certifications (Version 02) BeskrivningThis document presents the Standards and Certifications for the Modicon M580, M340, and X80 I/O ranges.engelska pdf 821.5 KB 2018-12-01 BeskrivningThis document presents the Standards and Certifications for the Modicon M580, M340, and X80 I/O ranges. -
Visa mer programvaraLanguage Format Storlek Datum Mjukvara - Released M340 SD-card writer (Version 1.0) BeskrivningProgramvara för att i en PC skriva till M340 SD-kort utan dito hårdvru CPU.svenska zip 2.4 MB 2012-03-06 BeskrivningProgramvara för att i en PC skriva till M340 SD-kort utan dito hårdvru CPU.M340 eCDOS (Version 2.20) all iso 32.9 MB 2010-05-21 Web Designer (synchro with BMXNOR0200H) (Version 2.41) BeskrivningThis modular RTU offer relies on an in-rack M340 module providing RTU protocols (DNP3, IEC60870-5) built-in the Modicon M340 PAC. BMXNOR0200H V1.6 is delivered with Web Designer V2.41. BMXNOR0200H V1.6 release supports the following new features or improvements: - Enhance RTU protocols capabilities for IEC60870-5-101/104: - Support up to 64 connections when BMX NOR works as an IEC60870-5-104 client. - Support to process multiple commands of each point type for per sector in parallel when working as Slave/Server. - Support counter Mode A and Mode B of M_IT_NA. - Support to manage the daylight saving time (DST) bit in time stamp. - Enhance C_DC to restore as "0" after pulse execuation. - Support exclusive IOA within each point type. - Support to specify time quality for backup events after power recover. - Enhance RTU protocols capabilities for DNP3: - Support to generate events on demand regardless of value and state. - Support to clear events in buffer on demand. - Support to send unsolicited messages immediately once there are events recorded. - Support to configure the buffer size of event buffer channel by channel. - Support to send SMS(Short Message Service) with PDU 7 bits and 8 bits. - Support to control delay between RTS signal and data transmission when modem is connected. - Quality and customer focused fixing V1.0/V1.5 customer quality or enhancements feedbacks. - Improve User manual. - Provide Upward compatibility from V1.0/1.5 to V1.6: - Firmware upgrade possible. - Upward compatibility for user Applications from V1.0/V1.5 to V1.6. Web Designer Software V2.41 allows to configure Web HMI services. - Email/SMS service - Datalogging service - custom web pages - animation table - graphics pagesengelska zip 266.6 MB 2014-02-06 BeskrivningThis modular RTU offer relies on an in-rack M340 module providing RTU protocols (DNP3, IEC60870-5) built-in the Modicon M340 PAC. BMXNOR0200H V1.6 is delivered with Web Designer V2.41. BMXNOR0200H V1.6 release supports the following new features or improvements: - Enhance RTU protocols capabilities for IEC60870-5-101/104: - Support up to 64 connections when BMX NOR works as an IEC60870-5-104 client. - Support to process multiple commands of each point type for per sector in parallel when working as Slave/Server. - Support counter Mode A and Mode B of M_IT_NA. - Support to manage the daylight saving time (DST) bit in time stamp. - Enhance C_DC to restore as "0" after pulse execuation. - Support exclusive IOA within each point type. - Support to specify time quality for backup events after power recover. - Enhance RTU protocols capabilities for DNP3: - Support to generate events on demand regardless of value and state. - Support to clear events in buffer on demand. - Support to send unsolicited messages immediately once there are events recorded. - Support to configure the buffer size of event buffer channel by channel. - Support to send SMS(Short Message Service) with PDU 7 bits and 8 bits. - Support to control delay between RTS signal and data transmission when modem is connected. - Quality and customer focused fixing V1.0/V1.5 customer quality or enhancements feedbacks. - Improve User manual. - Provide Upward compatibility from V1.0/1.5 to V1.6: - Firmware upgrade possible. - Upward compatibility for user Applications from V1.0/V1.5 to V1.6. Web Designer Software V2.41 allows to configure Web HMI services. - Email/SMS service - Datalogging service - custom web pages - animation table - graphics pagesWeb Designer for M340 RTU module (BMXNOR0200H) (Version 2.33) BeskrivningWeb Designer Software V2.33 allows to configure Web HMI services. - Email/SMS service - Datalogging service - custom web pages - animation table - graphics pagesengelska iso 273.4 MB 2012-03-08 BeskrivningWeb Designer Software V2.33 allows to configure Web HMI services. - Email/SMS service - Datalogging service - custom web pages - animation table - graphics pagesUnity Pro Ethernet Configuration Tool (Version 1.0.30.0) BeskrivningThe Unity Pro Ethernet Configuration Tool allows the user to configure an Ethernet network with EtherNet/IP and Modbus TCP devices using any of the following modules in the listed platforms: - Quantum 140 NOC 771 01 - Premium TSX ETC 101 - M340 BMX NOC 0401 For Unity v5.0 only Contains DTMs only. Does not include PDF documentation. Approximate File Size: 42 MB ** Note: To open the Ethernet/IP Configuration Tool when -01 modules are added to a PLC configuration, go to the Menu bar and select TOOLS, then select DTM BROWSER. A DTM Browser window will open with the module IP and description. Click on this to open the Configuration Tool. If -00 modules are configured, the Ethernet/IP button is selected.engelska zip 40.9 MB 2010-08-03 BeskrivningThe Unity Pro Ethernet Configuration Tool allows the user to configure an Ethernet network with EtherNet/IP and Modbus TCP devices using any of the following modules in the listed platforms: - Quantum 140 NOC 771 01 - Premium TSX ETC 101 - M340 BMX NOC 0401 For Unity v5.0 only Contains DTMs only. Does not include PDF documentation. Approximate File Size: 42 MB ** Note: To open the Ethernet/IP Configuration Tool when -01 modules are added to a PLC configuration, go to the Menu bar and select TOOLS, then select DTM BROWSER. A DTM Browser window will open with the module IP and description. Click on this to open the Configuration Tool. If -00 modules are configured, the Ethernet/IP button is selected.