To use the ASCO 917 or 918 with a photocell, accessory 47 is needed. Read the separate FAQ article on How to correctly wire the accessory 47 to the ASCO 918/917? for some initial installation instructions.
After correctly installing the accessory 47 module with the ASCO 918/917, the photocell becomes the switching device for the control of the opening and closing of the contactor. Reference the sample schematic below showing the typical connection of the photocell with the accessory 47 for a sample control voltage with a hot and a neutral line.
You may also watch the video below related to this.
After correctly installing the accessory 47 module with the ASCO 918/917, the photocell becomes the switching device for the control of the opening and closing of the contactor. Reference the sample schematic below showing the typical connection of the photocell with the accessory 47 for a sample control voltage with a hot and a neutral line.
You may also watch the video below related to this.
Released for: Schneider Electric Singapore
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
