1) If no admin badge is recorded on the charging station, you can activate the Bluetooth connection by powering the charging station Off and then On, and waiting for the strip LED to turn green. The bluetooth will be activated for commissioning and the session will close after 2 hours of inactivity.
2) If an admin badge is recorded on the charging station, tap the admin badge on the RFID reader. The Bluetooth connection will be activated and the session will close after for 10 minutes of inactivity.
2) If an admin badge is recorded on the charging station, tap the admin badge on the RFID reader. The Bluetooth connection will be activated and the session will close after for 10 minutes of inactivity.
Publikované pre: Schneider Electric Slovakia
Potrebujete pomoc?
Výber produktov
Rýchlo a jednoducho nájdite tie správne produkty a príslušenstvo pre vaše aplikácie.
Získať ponuku
Kontaktujte nás online a náš odborník sa s vami spojí.
Kde nakúpiť?
Jednoducho nájdite najbližšieho distribútora produktov Schneider Electric vo vašom okolí.
Centrum podpory
Nájdite zdroje podpory pre všetky vaše potreby na jednom mieste.
