How to Use the Secure NMC System Tool for the Network Management Card
Issue:
How to Use the Secure NMC System Tool
Cause:
Users wish to upgrade their Network Management Card 3 (NMC3) firmware
Product Line:
Network Management Card 3 (NMC3) - AP9640, AP9641, AP9643
Devices with an embedded Network Management Card 3 include (but are not limited to): Smart-UPS Online (SRT), Smart-UPS Ultra, Smart-UPS Modular Ultra, Metered/Switched Rack PDUs (AP71XXB, AP78XXB, AP79XXB, AP84XX, AP86XX, AP88XX, AP89XX, APDU99XX), Advanced Rack PDUs (AP10XX with the APDU9640NMC3 display, AP11XX)
Solution:.
Videos on using the SNS tool can be found here: https://fast.wistia.com/embed/channel/a2imaik0y2
For more information about the Secure NMC System Tool, please visit www.apc.com/secure-nmc
Should there be any further concerns, please contact our Customer Care Center at https://www.apc.com/us/en/support/
Publikované pre: Schneider Electric Slovakia
Potrebujete pomoc?
Výber produktov
Rýchlo a jednoducho nájdite tie správne produkty a príslušenstvo pre vaše aplikácie.
Získať ponuku
Kontaktujte nás online a náš odborník sa s vami spojí.
Kde nakúpiť?
Jednoducho nájdite najbližšieho distribútora produktov Schneider Electric vo vašom okolí.
Centrum podpory
Nájdite zdroje podpory pre všetky vaše potreby na jednom mieste.